Selected model: Tecno KG5q (Tecno Spark 8C)
Operation: Eliminar FRP
Software version: 5.13
Work ID: 10025112

Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM40 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM41 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM41 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0x193B3E4E, 0x00EDC707, 0x81F4F404, 0xF948DEDD
Get Chip ID... [MT6761]
Get SOC ID... [5AC647ED8AC544139830992921D7F7BCE593DDECB7BA82F26DC13A0427FB1DE0]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x15010043555441343205677D8F0068E3
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
   EMMC_CNAME: CUTA42
   EMMC_ID   : 0x15010043555441343205677D8F0068E3
   EMMC_BOOT1: 0x0000400000 (4,00Mb)
   EMMC_BOOT2: 0x0000400000 (4,00Mb)
   EMMC_RPMB : 0x0001000000 (16,00Mb)
   EMMC_USER : 0x0E8F800000 (58,24Gb)
RAM INFO:
   INT_SRAM: 0x000003A500 (233,25Kb)
   EXT_RAM : 0x0080000000 (2,00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand        : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model        : TECNO KG5j
Product Name         : KG5j-OP
Product Device       : TECNO-KG5j
Product Board        : TECNO-KG5j
Board Platform       : mt6761
Build ID             : RP1A.200720.011
Build Date           : Fri Aug 25 14:47:33 CST 2023
Display ID           : TECNO-RGo-32-230825V304
Security Patch       : 2023-09-05
Version SDK          : 30
Version Release      : 11
Version Codename     : REL
Firmware Version     : 230825V463
Userdata FS Type     : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_KG5q%20(Tecno%20Spark%208C)/FRP_BACKUP_(2023-10-13_15-33-22)/
Writting FRP data... OK
Erase FRP done!

https://ibb.co/QfSpDP3

Selected model: Tecno KG5q (Tecno Spark 8C)
Operation: Eliminar FRP
Software version: 5.13
Work ID: 10025112

Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM40 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM41 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM41 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0x193B3E4E, 0x00EDC707, 0x81F4F404, 0xF948DEDD
Get Chip ID... [MT6761]
Get SOC ID... [5AC647ED8AC544139830992921D7F7BCE593DDECB7BA82F26DC13A0427FB1DE0]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x15010043555441343205677D8F0068E3
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
   EMMC_CNAME: CUTA42
   EMMC_ID   : 0x15010043555441343205677D8F0068E3
   EMMC_BOOT1: 0x0000400000 (4,00Mb)
   EMMC_BOOT2: 0x0000400000 (4,00Mb)
   EMMC_RPMB : 0x0001000000 (16,00Mb)
   EMMC_USER : 0x0E8F800000 (58,24Gb)
RAM INFO:
   INT_SRAM: 0x000003A500 (233,25Kb)
   EXT_RAM : 0x0080000000 (2,00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand        : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model        : TECNO KG5j
Product Name         : KG5j-OP
Product Device       : TECNO-KG5j
Product Board        : TECNO-KG5j
Board Platform       : mt6761
Build ID             : RP1A.200720.011
Build Date           : Fri Aug 25 14:47:33 CST 2023
Display ID           : TECNO-RGo-32-230825V304
Security Patch       : 2023-09-05
Version SDK          : 30
Version Release      : 11
Version Codename     : REL
Firmware Version     : 230825V463
Userdata FS Type     : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_KG5q%20(Tecno%20Spark%208C)/FRP_BACKUP_(2023-10-13_15-33-22)/
Writting FRP data... OK
Erase FRP done!

https://ibb.co/QfSpDP3